Product Overview:
Evercoat METAL GLAZE® Ultra (100425) is the world’s best two-part sanding polyester putty for use as a finishing coat over body filler, large panels, or small spot filling.
This new and improved formula features unparalleled sanding qualities as a result of the patent pending EcoResin™. Its unique thinner viscosity makes it ideally suited for intermixing with other Metalworks® products to improve flow out.
Available in 30 fluid ounce size bottle, includes hardener.
Features and Benefits:
- World's best sanding polyester putty spreads smoothly and self-levels
- Thinner viscosity makes it ideally suited for intermixing with other Evercoat premium fillers
- Can be applied directly to sanded OEM paint for small repairs
- Excellent adhesion to aluminum, stainless steel, galvanized steel, SMC, fiberglass, and silicon bronze welds
- Contains patent pending EcoResin™ technology
Video:
Recommended Substrates:
- Sanded OEM paint
- Aluminum
- Steel
- Galvanized Steel
- SMC
- Fiberglass
- Silicon Bronze Welds
- NOTE: For flexible plastics, use POLY-FLEX™ Flexible Glazing Putty
Mixing:
- Place the desired amount of material on a clean, non-fibrous surface. Knead
the cream hardener before use - Measure hardener 2% by weight (add a ribbon of cream hardener from edge to edge across the center of a 4” diameter puddle)
- Puddles larger than 4” (10 cm) in diameter will require additional hardener
- Mix thoroughly until a uniform color is achieved
- Approximate setting time is 2.5-4.5 minutes @ 72°F (22°C)
- Use with Evercoat® Cream Hardener Only!
Tech Specs:
- Appearance: Light green thixotropic liquid
- VOC: Refer to Section 9 of the Safety Data Sheet
- Relative Density: Refer to Section 9 of the Safety Data Sheet
- Setting Time: 2.5-4.5 minutes
- Sand Time: 10-15 minutes
- Max. Recommended Thickness (sanded): 1/8 inch (3mm)
- Note: Properties are typical values and should not be considered as sales specifications. Physical testing performed @ ~72°F (22°C) / 75% RH unless otherwise noted
Safety:
- Read all directions and warnings prior to using Evercoat® products. Safety Data Sheets can be found online at www.evercoat.com
- Never return mixed filler to can.
- Keep the container closed and store in a cool dry place.
- Use with Evercoat® Cream Hardener Only!
- Click here for Safety Data Sheet
** This item is considered a Hazardous Materials (HAZMAT) and must be handled in accordance with all applicable federal, state, and international regulations. Item ships UPS Ground ONLY**